

Plugs in


Table Lamps · LK-TB-101
400 lm of warm light over about four square metres.
Photometric data
Supplier-declared, measured to EN 13032-1 at 25 °C ambient, with a 4.5 W E27 bulb at 2700 K
Supplier test report, Ra measured to CIE 13.3-1995
Assumes 2.4–2.6 m ceiling, light-coloured matt walls, and this fitting as the only light in that zone.
Electrical compliance
A copy is available on request from support@mazodesign.shop. Articles without a declaration reference are not offered for sale on this site.
This fitting contains no light source, so the energy label belongs to whichever bulb you fit.
Marked on the product. It must not go in household waste — how to return it.
Installation
No wiring work
Built for a 220–240 V / 50 Hz supply. A plug adapter changes the shape of the pins, not the voltage — we do not ship to 100–127 V markets, and the checkout blocks those destinations before you can submit an order.
Light source
You will need a bulb before this fitting will do anything. We sell them, and so does every supermarket.
This is a safety limit, not a brightness suggestion. Exceeding it risks overheating and fire.
Protection rating
Indoor, dry locations only
Dimming
Dimmable only if you fit a dimmable bulb and a wall dimmer.
Check your dimmer model before you order. Dimmer compatibility depends on the dimmer in your wall as much as on the fitting, and no one can guarantee it across every installation.
DKK 695
inkl. 25% moms · DKK 556 ekskl. moms · DKK 139 moms
About this one
The smallest of the three-part table series. A spun steel base, a straight-sided steel shade, and a cord you can actually see — nothing is hidden, because there is nothing to hide.
It arrives without a bulb. That is deliberate: an E27 socket lets you pick the output and the colour temperature yourself, and replace the light source without replacing the lamp. The 400 lm figure below is what we measured with the bulb we recommend.
Build
Original design
Others in Table Lamps


Plugs in


Plugs in


Plugs in