

Plugs in


Table Lamps · LK-TB-103
A closed dome. All 500 lm go down, none of it into your eyes.
Photometric data
Supplier-declared, measured to EN 13032-1 at 25 °C ambient, with a 5.5 W E27 bulb at 3000 K
We hold no colour rendering test report for this article, so no figure is printed. We are not going to estimate one.
Assumes 2.4–2.6 m ceiling, light-coloured matt walls, and this fitting as the only light in that zone.
Electrical compliance
A copy is available on request from support@mazodesign.shop. Articles without a declaration reference are not offered for sale on this site.
This fitting contains no light source, so the energy label belongs to whichever bulb you fit.
Marked on the product. It must not go in household waste — how to return it.
Installation
No wiring work
Built for a 220–240 V / 50 Hz supply. A plug adapter changes the shape of the pins, not the voltage — we do not ship to 100–127 V markets, and the checkout blocks those destinations before you can submit an order.
Light source
You will need a bulb before this fitting will do anything. We sell them, and so does every supermarket.
This is a safety limit, not a brightness suggestion. Exceeding it risks overheating and fire.
Protection rating
Indoor, dry locations only
Dimming
Dimmable only if you fit a dimmable bulb and a wall dimmer.
Check your dimmer model before you order. Dimmer compatibility depends on the dimmer in your wall as much as on the fitting, and no one can guarantee it across every installation.
DKK 985
inkl. 25% moms · DKK 788 ekskl. moms · DKK 197 moms
About this one
The dome is opaque and the opening faces the table, so the lamp lights the surface rather than the room. Put it where you want a pool of light and not a general glow.
Because the shade is closed, the pattern on the table has a hard edge about 70 cm across at normal table height. That edge is the point.
Build
Original design
Others in Table Lamps


Plugs in


Plugs in


Plugs in