

Plugs in


Table Lamps · LK-TB-104
Tall and narrow. 450 lm from a 55 cm column.
Photometric data
Supplier-declared, measured to EN 13032-1 at 25 °C ambient, with a 5 W E27 bulb at 2700 K
We hold no colour rendering test report for this article, so no figure is printed. We are not going to estimate one.
Assumes 2.4–2.6 m ceiling, light-coloured matt walls, and this fitting as the only light in that zone.
Electrical compliance
A copy is available on request from support@mazodesign.shop. Articles without a declaration reference are not offered for sale on this site.
This fitting contains no light source, so the energy label belongs to whichever bulb you fit.
Marked on the product. It must not go in household waste — how to return it.
Installation
No wiring work
Built for a 220–240 V / 50 Hz supply. A plug adapter changes the shape of the pins, not the voltage — we do not ship to 100–127 V markets, and the checkout blocks those destinations before you can submit an order.
Light source
You will need a bulb before this fitting will do anything. We sell them, and so does every supermarket.
This is a safety limit, not a brightness suggestion. Exceeding it risks overheating and fire.
Shade material and heat
Protection rating
Indoor, dry locations only
Dimming
Dimmable only if you fit a dimmable bulb and a wall dimmer.
Check your dimmer model before you order. Dimmer compatibility depends on the dimmer in your wall as much as on the fitting, and no one can guarantee it across every installation.
DKK 1,150
inkl. 25% moms · DKK 920 ekskl. moms · DKK 230 moms
About this one
A slim vertical body with a fabric-wrapped diffuser running most of its height. It gives a soft column of light rather than a spot, which is why the useful area is wider than the lumen figure suggests.
It needs a clear 60 cm of height. On a low sideboard it works; under a shelf it does not.
Build
Original design
Others in Table Lamps


Plugs in


Plugs in


Plugs in