

Electrician required


Pendants · LK-PD-407
800 lm at 4000 K over a work surface. Hard-wired.
Photometric data
Supplier-declared, measured to EN 13032-1 at 25 °C ambient, integrated module at full output
We hold no colour rendering test report for this article, so no figure is printed. We are not going to estimate one.
Assumes the fitting hangs 75–85 cm above the worktop. This is a working-surface figure, not a whole-kitchen figure.
Electrical compliance
A copy is available on request from support@mazodesign.shop. Articles without a declaration reference are not offered for sale on this site.
EU energy label under Regulation 2019/2015.
Marked on the product. It must not go in household waste — how to return it.
Installation
An authorised electrician is required
Built for a 220–240 V / 50 Hz supply. A plug adapter changes the shape of the pins, not the voltage — we do not ship to 100–127 V markets, and the checkout blocks those destinations before you can submit an order.
Light source
This is a safety limit, not a brightness suggestion. Exceeding it risks overheating and fire.
Rated to L80B10 at 25 °C ambient. The LED cannot be changed: when it reaches end of life, the fitting has reached end of life with it.
Protection rating
Indoor, dry locations only
Dimming
Dimmable from a compatible trailing-edge wall dimmer.
Check your dimmer model before you order. Dimmer compatibility depends on the dimmer in your wall as much as on the fitting, and no one can guarantee it across every installation.
DKK 1,850
inkl. 25% moms · DKK 1,480 ekskl. moms · DKK 370 moms
About this one
A deep aluminium cone at 4000 K, which is colder than the rest of the pendant range on purpose: over a chopping board, neutral white shows the difference between raw and cooked more clearly than warm white does.
The deep cone keeps the bulb out of sight from a standing position on the other side of the island.
Build
Original design
Others in Pendants


Electrician required


Electrician required


Electrician required